|
Pump overhaul is often seen in a negative light as it is normally the result of pump failure.
Pump Management use a pump overhaul as the method of improving plant reliability. By carrying out failure mode analysis (FMA) and failure cause analysis (FCA), Pump Management will return the pump together with a comprehensive report and recommendations. If clients want to improve reliability further, there is the option of a PMPTM.
Facilities
There are two pump overhaul facilities, based in the northwest.
4,000m2 facility
- 1 x 15m high bay
- 2 x 10 tonne overhead cranes
- 2 x 8m high bays
- 1 x 5 tonne overhead crane
- 1 x 3 tonne overhead crane
- 400m2 non-ferrous workshop for stainless steel and exotic alloys
- Clean area facility
600m2 facility accommodating machine shop with
- 5 tonne horizontal borer
- 2m dia vertical borer
- 1.1m dia vertical borer
- large milling machine
- lathes up to 1m swing and 3.5m between centres
- cylinder honing machines
- shotblasting machine
Field Service
Pump Management have experienced field service engineers available for on-site maintenance, pump removal repair and installation.
Response
Field Service engineers are available on a 24/7 call-out basis if urgent repairs are required.
As part of a PMP™ contract, Pump Management provides engineers on-site to meet the support required for the contract. This provides an integrated specialist pump engineer as part of the end users general maintenance.
Pump Management… a positive result from pump overhaul
|
